TP-Link Archer MR200 User Manual page 94

2. Windows was unable to connect to XXXX /Cannot join this network/Taking longer
than usual to connect to this network.
1 ) Check the wireless signal strength of your network, if it is weak (1~3 bars),
2 ) Change the wireless Channel of the router to 1,6,or 11 to reduce interference
3 ) Re-install or update the driver for your wireless adapter of the computer;
4 ) Connect to wireless network.
Downloaded from www.Manualslib.com
please move the router closer and try again;
from other networks;
manuals search engine
90