TP-Link Archer MR200 User Manual page 68

Chapter 11
Downloaded from www.Manualslib.com
8 ) Enter the
keep
Note:
The key should consist of visible characters without blank space.
Make sure Site A and Site B use the same key.
9 ) Leave the
OK
3. Configuration on Site B (remote network). Refer to step 2
configuration on Site A and make sure that Site A and Site B
use the same
settings.
4. The Status
has been set up successfully.
5. 5. Check the VPN connection. You can ping site B' LAN IP
from your computer to verify that the IPSec VPN connection
is set up correctly.
Tips: To check the VPN connection, you can do the following.
a . On the host in Site A, press
Run dialog. Input "cmd" and hit
b . In the CLI window, type in "ping 192.168.2.x" ("192.168.2.x"
can be IP address of any host in Site B). Then press [Enter].
manuals search engine
Pre-Shared Key
Perfect Forward Secrecy
Advanced Settings as default value. Then click
to save.
pre-shared keys
column will change to
Specify Your Network Settings
for IKE authentication. Then
enabled.
and Perfect Forward Secrecy
Up if the VPN connection
[Windows Logo] + [R] to open
OK.
64