Open Ports Dynamically By Port Triggering - TP-Link Archer MR200 User Manual

Chapter 10
Done!

10. 2. Open Ports Dynamically by Port Triggering

Port triggering can specify a triggering port and its corresponding external ports.
When a host in the local network initiates a connection to the triggering port, all the
external ports will be opened for subsequent connections. The router can record the IP
address of the host. When the data from the Internet return to the external ports, the
Downloaded from www.Manualslib.com
4. Click View Existing
port, internal port and protocol will be auto-populated. Enter
the PC's IP address 192.168.1.100 in the
5. Click OK
Tips:
1. It is recommended to keep the default settings of
are not clear about which port and protocol to use.
2. If the service you want to use is not in the
corresponding parameters manually. You should verify the port number that the
service needs.
3. You can add multiple virtual server rules if you want to provide several services in
a router. Please note that the
Users in the Internet can enter
http:// 218.18.232.154) to visit your personal website.
Tips:
1. WAN IP should be a public IP address. For the WAN IP is assigned dynamically by
ISP, it is recommended to apply and register a domain name for the WAN by DDNS,
go to Set Up a Dynamic DNS Service Account
use http://domain name
2. If you have changed the default
External Port
manuals search engine
Services, and choose HTTP. The external
to save the settings.
External Port cannot be overlapped.
http:// WAN IP
to visit the website.
External Port, you should use
or http://domain name: External Port
NAT Forwarding
Internal IP field.
Internal Port and Protocol if you
Service Type, you can enter the
(in this example:
for more information. Then you can
http://WAN IP:
to visit the website.
42