Cautions - Stryker 240-030-960 User Manual

Vision elect hdtv 26" high-definition
Table of Contents

Advertisement

9. Do not attempt internal repairs or adjustments not specifically
detailed in this operating manual.
10. Pay close attention to the care and cleaning instructions in this
manual. A deviation may cause damage (refer to the Cleaning
section).
11. Do not sterilize the monitor.
12. Use appropriate caution to prevent contact with fluids if the unit is
being used with a power supply in patient environments.

Cautions

1. The AC Adapter must be plugged in to a grounded power outlet.
2. Use only the proprietary VISION ELECT HDTV power supply
(P/N 240-030-950, Manufacturer: JEC Korea, Model No:
JMW1150KA2400F07) for the VISION ELECT HDTV monitor
(model 240-030-960). Completely secure the connection
between the DC power cord and the extension cord.
3. Grounding reliability can only be achieved when the equipment is
connected to an equipment receptacle labeled "Hospital Only" or
"Hospital Grade."
4. To connect to an international power supply, use an attachment
plug appropriate for the power outlet.
5. Turn power off when the unit is not in use.
6. Remove the power module and connection when transporting the
unit.
7. Save the original carton and associated packing material. They
will be useful should you have to transport or ship the unit.
8. Handle the monitor with care. Do not strike or scratch the screen.
9. Never operate the unit right after having been transported from a
cold location directly to a warm location.
10. Do not expose the monitor to moisture or apply liquid cleaners
directly to the screen. Spray the cleaning solution into a soft cloth
and clean gently.
11. Allow adequate air circulation to prevent internal heat buildup.
12. Do not place the unit on surfaces (rugs, blankets, etc.) or near
materials (curtains, draperies) that may block the ventilation slots.
The monitor is cooled by natural convection and has no fan.
13. Do not install the unit near sunlight, excessive dust, mechanical
vibration, or shock.
14. The unit is designed for operation in a horizontal position. Do not
operate the unit in a vertical position.
English
EN-3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents