Fiber Optic Module (Optional) Installation; Input Selection List - Stryker 240-030-960 User Manual

Fiber Optic Module (optional) Installation

1. Power OFF the monitor using the hard power switch.
2. Unscrew the two screws from the cover plate, then remove the
cover plate.
3. Insert the Fiber Optic Module (Stryker P/N 240-030-962) into the
Fiber Optic Module slot.
Caution Excessive force or misalignment during insertion
might damage the module connector.
4. Power ON the monitor using the hard power switch.

Input Selection List

Digital RGB
Analog RGB
HD/SD-SDI
Component (Y/Pb/Pr)
RGBS
S-Video
C-Video
SOG
Exit
Unscrew those 2 screws
English
EN-11