Save A Program As A File; Storing The Lak Certificate; Manage Chair Configurations - Invacare LiNX Service Manual

8.5.4 Save a program as a file

1.
Click on Save to file button or click on File in menu bar
and select either Save or Save As... from menu.
2. Save File As dialogue opens.
3. Select appropriate folder.
4. Enter name into File name box.
5. Click on Save button to finish. The file is saved with
.lci extension.
Remove a file from the file list
1.
Right-click on file in Open file dialogue and select
Remove from list.

8.5.5 Storing the LAK certificate

To edit files offline, you need to authorize your computer by
storing the LiNX Access Key (LAK) certificate.
The LAK certificate determines how you view and edit offline
programs (.lci files) and is taken from a connected LiNX
Access Key to provide one of two levels of access, that are:
• Distributor and
• Read-only.
To edit your files with a Distributor's access level, you need
to store an LAK certificate from a LiNX Access Key.
If you do not store you LAK certificate from your LiNX Access
Key, you have read-only access to your stored files and
therefore you are not able to edit them.
To store LAK certificate:
1. Connect to LiNX system.
2. Click on File menu.
1605129-C
3.
Select Authorise Computer option. A message is
displayed telling you how many authorizations remain
(you can only perform this operation three times) and
asks if you want to continue.
4. Click on Authorise button to continue.
5. A message is displayed when the authorization is
complete. Click on OK button to finish.

8.5.6 Manage chair configurations

Set default wheelchair configuration
1. Click Manage to open wheelchair configuration list.
2. Select required configuration from list.
3. Select Load as Current.
4. A message is displayed warning you, that current
configuration will be overwritten.
Click either on Discard to finish or Cancel if you do not
want to finish.
Reset to default wheelchair configuration
To reset the connected wheelchair configuration to the
selected default wheelchair configuration:
1. Click on Reset to Default button on the tool bar.
2. A message is displayed warning you, that the reset
process will overwrite all existing parameters.
Click either on Discard to finish or Cancel if you do not
want to finish.
Using the LiNX Access PC tool
75