Renault KANGOO BE BOP Driver's Handbook Manual page 33

CHILD SAFETY: choosing a child/baby seat mounting
2
The two rings 1 are located between
the seatback and the seat base, behind
the zip fasteners, and are identified by
a marking.
To ensure your child seat can be easily
fitted and locked on rings 1, use access
guides 2 on the child seat.
Check that the seatback of the forward-facing child seat is in contact with
the back of the vehicle seat.
In this case, the child seat may not always rest on the base of the vehi-
cle seat.
1
3
4
The third ring is used to attach the
upper strap on some child seats.
Fit the hook of the strap onto ring 3 on
the corresponding side and pull the
strap so that the seatback of the child
seat comes into contact with the seat-
back of the vehicle seat.
Important: Never use ring 4 as an
ISOFIX attachment point.
(2/2)
The
(rings) in the luggage com-
partment 3 cannot be used
if they are already being
used to mount other components:
luggage net + load in the luggage
compartment or child/baby seat +
load in the luggage compartment.
The ISOFIX anchorage
points have been exclu-
sively designed for child
seats with the ISOFIX
system. Never fit a different type of
child seat, seat belt or other objects
to these anchorage points.
Check that nothing is obstructing
the anchorage points.
If your vehicle has been involved in
a road accident, have the ISOFIX
anchorage points checked and re-
place your child seat.
anchoring points
1.27