Renault KANGOO BE BOP Driver's Handbook Manual page 145

CHANGING A WHEEL
Undo the bolts and take off the wheel.
For vehicles fitted with alloy wheel rims,
use the guide bolt located in the tool kit
to finish loosening and start tightening
the bolts. For more information on this
tool, refer to Section 5 "Tool kit".
Fit the emergency spare wheel on
the central hub and turn it to align the
mounting holes in the wheel and the
hub.
Tighten the bolts and lower the jack.
If bolts are supplied with the emergency
spare wheel, only use these bolts for
the emergency spare wheel.
Tighten the bolts, checking that the
wheel is correctly positioned on its hub
and lower the jack.
With the wheels on the ground, tighten
the screws as fully as possible and
check the tightness as soon as possi-
ble (tightening torque 110 Nm).
(2/2)
Anti-theft bolt
If you use anti-theft bolts, fit these
nearest the valve (wheel trim may
not be able to fit).
If you have a puncture, re-
place the wheel as soon as
possible.
A tyre which has been punc-
tured should always be inspected
(and repaired, where possible) by a
specialist.
5.5