Rear Seat Functions - Renault KANGOO BE BOP Driver's Handbook Manual

REAR SEAT FUNCTIONS

1
Folding up a seat
– Lower the headrest;
– put the seat in the table position;
– move the seat backwards as far as it
will go;
– move the handle 1 and lift the seat
at the front until it locks in the vertical
position.
Note: if the seat does not lift, move it
forwards a position then move handle 1
again to lift the seat.
(1/2)
2
4
Returning a seat to its normal
position
Operate control 2 under the seat to
unlock the seat from the vertical posi-
tion, lower it to approximately ten centi-
metres from the floor and let it go.
The seat positions itself under its own
weight. Check that it is correctly locked.
To remove a seat
– Lower the headrest;
– unfasten the seat belt buckle(s);
– fold down the seatback;
– move the seat backwards as far as it
will go;
– operate the handle 1 and lift the seat
until it locks in the vertical position.
Note: if the seat does not lift, move it
forwards a position then move handle 1
again to lift the seat.
3 – Unlock the catches 3 and 4.
– Hold the seat then lift the seat up-
wards, using the handle 5 located
behind the seat.
cloths, toys, etc.)
When moving the rear
seats, check that the an-
choring points are clean
(they must be free from grit,
3.27