Drive Carrier Leds; Sas/Sata Drives; Scsi Drives - Supero 8047R-7JRFT User Manual

SUPERSERVER 8047R-7JRFT USER'S MANUAL
3-4

Drive Carrier LEDs

Your system supports SAS/SATA drives.

SAS/SATA Drives

Each SAS/SATA drive carrier has two LEDs.
•
Blue:
Solid on = Drive is present and available.
Blinking = Drive is actively being accessed.
Each Serial ATA drive carrier has a blue LED. When illuminated in a solid
on state, this blue LED (on the front of the SAS/SATA drive carrier) indicates
drive activity. A connection to the SAS/SATA backplane enables this LED to
blink on and off when that particular drive is being accessed.
•
Red:
Solid on = Drive failure
Blinking = Rebuilding RAID
The red LED to indicate an SAS/SATA drive failure. If one of the SAS/SATA
drives fail, you should be notifi ed by your system management software.

SCSI Drives

This chassis does not support SCSI drives at this time.
3-4