Lattice Semiconductor
Appendix for LatticeXP™ FPGAs
Table 24. Performance and Resource Utilization
Mode
Parameter File
8237
dma_mc_xm_3_001.lpc
Non-8237
dma_mc_xm_3_002.lpc
1. Performance and utilization characteristics are generated using LFXP10E-4F388C in Lattice ispLEVER 5.0 software. When using this IP
core in a different density, package, or speed grade, performance may vary.
Supplied Netlist Configurations
The Ordering Part Number (OPN) for all configurations of this core in LatticeXP devices is DMA-MC-XM-N3.
Table 25 lists the Lattice-specific netlists that are available in the Evaluation Package, which can be downloaded
from the Lattice web site at www.latticesemi.com.
Table 25. Core Configuration
Name of
Parameter File
8237 Mode
dma_mc_xm_3_001.lpc
Non-8237 Mode
dma_mc_xm_3_002.lpc
You can use the IPexpress software tool to help generate new configurations of this IP core. IPexpress is the Lattice
IP configuration utility, and is included as a standard feature of the ispLEVER design tools. Details regarding the
usage of IPexpress can be found in the IPexpress and ispLEVER help system. For more information on the
ispLEVER design tools, visit the Lattice web site at: www.latticesemi.com/software.
Name of
SLICEs
746
1794
Number of Channels
4
4
Multi-Channel DMA Controller User's Guide
1
sysMEM
LUTs
EBRs
1287
0
3084
0
Data Bus Width
Address Bus Width
8
32
27
Registers
I/O
555
59
1179
125
Word Count Width
16
16
32
16
f
(MHz)
MAX
71
80
Need help?
Do you have a question about the ispLever Core Multi-Channel DMA Controller and is the answer not in the manual?