Specifications - Pioneer XDJ-RX Service Manual

1

2. SPECIFICATIONS

A Power requirements....................... AC 110 V to 240 V, 50 Hz/60 Hz
Power consumption ..................................................................35 W
Power consumption (standby) ................................................0.4 W
Main unit weight........................................................8.0 kg (17.6 lb)
Max. external dimensions.........728.2 mm (W) × 104.2 mm (H) × 411.9 mm (D)
Tolerable operating temperature........... +5 °C to +35 °C (+41 °F to +95 °F)
Tolerable operating humidity............5 % to 85 % (no condensation)
Audio Section
Sampling rate .....................................................................44.1 kHz
A/D, D/A converter................................................................. 24 bits
Frequency characteristic
USB, LINE/PHONO, MIC1, MIC2 ........................ 20 Hz to 20 kHz
B
S/N ratio (rated output, A-WEIGHTED)
USB ................................................................................... 111 dB
LINE/PHONO ...................................................................... 97 dB
MIC...................................................................................... 84 dB
Total harmonic distortion (20 Hz — 20 kHzBW)
USB ..................................................................................0.002 %
LINE/PHONO ...................................................................0.004 %
Standard input level / Input impedance
LINE/PHONO ........................................................–12 dBu/47 kΩ
MIC.......................................................................–52 dBu/8.5 kΩ
Standard output level / Load impedance / Output impedance
MASTER1......................................... +6 dBu/10 kΩ/390 Ω or less
MASTER2......................................... +2 dBu/10 kΩ/820 Ω or less
C
BOOTH............................................. +6 dBu/10 kΩ/390 Ω or less
PHONES .............................................. +8 dBu/32 Ω/10 Ω or less
Rated output level / Load impedance
MASTER1................................................................24 dBu/10 kΩ
MASTER2................................................................20 dBu/10 kΩ
Crosstalk
LINE/PHONO ...................................................................... 82 dB
Channel equalizer characteristic
HI .......................................................... –26 dB to +6 dB (13 kHz)
MID......................................................... –26 dB to +6 dB (1 kHz)
LOW ....................................................... –26 dB to +6 dB (70 Hz)
Microphone equalizer characteristic
HI ........................................................ –12 dB to +12 dB (10 kHz)
LOW ................................................... –12 dB to +12 dB (100 Hz)
D
Input / Output terminals
LINE/PHONO terminals
RCA pin jack........................................................................ 2 sets
MIC1 terminal
XLR connector/phone jack (Ø 6.3 mm) ................................. 1 set
MIC2 terminal
Phone jack (Ø 6.3 mm).......................................................... 1 set
MASTER1 terminals
XLR connector....................................................................... 1 set
MASTER2 terminals
RCA pin jacks ........................................................................ 1 set
BOOTH OUT terminals
E
Phone jack (Ø 6.3 mm).......................................................... 1 set
PHONES terminals
Stereo phone jack (Ø 6.3 mm) .............................................. 1 set
Stereo mini phone jack (Ø 3.5 mm)....................................... 1 set
USB terminal
A type .................................................................................. 2 sets
B type .................................................................................... 1 set
• Be sure to use the [MASTER1] terminals only for a balanced
output. Connection with an unbalanced input (such as RCA)
using an XLR to RCA converter cable (or converter adapter), etc.,
may lower the sound quality and/or result in noise.
For connection with an unbalanced input (such as RCA), use the
F [MASTER2] terminals.
• The specifications and design of this product are subject to
change without notice.
6
1
2
(28.7 in. (W) × 4.1 in. (H) × 16.2 in. (D))
2
3
Accessories
• Power cord
(LSYXJ8: ADG1244)
(UXJCB: DDG1108)
(AXJ5: DDG1114)
• LAN cable
(DDE1141)
• Warranty (LSYXJ8 only)
• Operating instructions ( Qick start guide)
(LSYXJ8: DRH1293, DRH1294)
(UXJCB: DRH1292)
(AXJ5: DRH1299)
• Software information
(DRH1305)
XDJ-RX
3
4
4