S3C6400/6410 INSTALLATION MANUAL FOR POST PROCESSOR
Second, please compile the post processor module as shown below. (At Host Side)
Before compiling the post processor driver module, please modify "Makefile". kernel directory should be
modified in "Makefile" like below.
s3c_pp.ko file is module object.
Third, please do the following(At target Side). Insmod command must be used at target side.
FIGURE . Makefile of Post processor
FIGURE . The post processor module compilation
Preliminary product information describe products that are in development,
for which full characterization data and associated errata are not yet available.
Specifications and information herein are subject to change without notice.
8