Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Erbauer ERB049DRH
Summary of Contents for Erbauer ERB049DRH
- Page 1 WARRANTY YEARS ERB049DRH 1100W BREAKER PDH150B-M-070927.indd 1 2007-9-27 11:19:49...
- Page 2 PDH150B-M-070927.indd 2 2007-9-27 11:19:49...
- Page 3 Congratulations on your purchase of a quality power tool from Erbauer (UK) Ltd. This product should give you reliable service but for your peace of mind this power tool does carries a 24-month guarantee, the terms of which are detailed below.
-
Page 4: Safety Instructions
SAFETY INSTRUCTIONS Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. - Page 5 A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f.
-
Page 6: Double Insulation
HEALTH ADVICE Warning! When drilling, sanding, sawing or grinding, dust particles will be produced. In some instances, depending on the materials you are working with, this dust can be particularly harmful to you (e.g. lead from old gloss paint). You are advised to consider the risks associated with the materials you are working with and to reduce the risk of exposure.You should: - Work in a well-ventilated area. -
Page 7: Important Note
Important note Be sure the supply is the same as the voltage given on the rating plate.The tool is fitted with a two-core cable and plug. Remove the mains plug from socket before carrying out any adjustment or servicing. SYMBOLS Read the manual Warning Wear gloves... - Page 8 LOCK SLEEVE AUXILIARY HANDLE GREASE BOX COVER ANTI-VIBRATION MAIN HANDLE ON/OFF SWITCH SOFT GRIP HANDLE CARBON BRUSH COVER (ON BOTH SIDES) AUXILIARY HANDLE LOCKING KNOB POINT CHISEL AND FLAT CHISEL 10. CARBON BRUSH 11. GREASE TANK PDH150B-M-070927.indd 8 2007-9-27 11:19:50...
-
Page 9: Technical Data
TECHNICAL DATA Voltage: 230V~50Hz Power: 1100W Impact rate: 3,800min Impact energy: Protection class: Net weight: 7.5kg SOUND PRESSURE LEVEL& SOUND POWER LEVEL: The guaranteed value according to 2000/14/EC is: LwA=103dB Vibration level Vibration total values determined according to EN60745 Vibration emission value ah.Cheq=16.082m/s (main handle) Vibration emission value ah.Cheq=19.283m/s... -
Page 10: Operation Instructions
OPERATION INSTRUCTIONS Note: Before using the tool, read the instruction book carefully. 1. Adjusting the auxiliary handle (See Fig For your personal safety we recommend using the auxiliary handle at all times. To adjust the handle, loosen the handle lock knob anti-clockwise. -
Page 11: Maintenance
Warning: Always wear eye protection with this tool when performing overhead operations. 7. Lubrication machine (See Fig 5) The machine has a grease-packed lubrication system. Regularly check if there is sufficient grease. To check and add grease, remove screws on the grease box cover using a screwdriver. If the grease is not enough, filling grease into the box using only the hammer grease provided Fig 5... -
Page 12: Troubleshooting
TROUBLESHOOTING 1. If your power tool does not start, check the plug on the mains supply first. 2. If your power tool work efficiency is too low, please add some grease in the grease box. 3. If your power tool use in low efficiency, please check whether the tool is blunt. -
Page 13: Plug Replacement
PLUG REPLACEMENT If you need to replace the fitted plug then follow the instructions below. IMPORTANT The wires in the mains lead are coloured in accordance with the following code: Blue – Neutral Brown – Live As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug,... -
Page 14: Declaration Of Conformity
Declaration of Conformity We, Importer Erbauer (UK) LTD BA22 8RT Declare that the product 1100W BREAKER ERB049DRH Complies with the following Directives, EC Machinery Directive 98/37/EC EC Low Voltage Directive 2006/95/EC EC Electromagnetic Compatibility Directive 89/336/EEC amended by 93/68/EEC Noise Emission in the Environment by Equipment for Use Outdoors Directive... - Page 15 PDH150B-M-070927.indd 15 2007-9-27 11:19:52...
- Page 16 PDH150B-M-070927.indd 16 2007-9-27 11:19:52...
Need help?
Do you have a question about the ERB049DRH and is the answer not in the manual?
Questions and answers