Planar Dome C3i/EX User Manual page 47

Dome E5 Specification
In locations where 240V outlets are used, connect the Dome E5 display to only a center-
tapped, 240V, single-phase supply (only for Canada and the United States).
Category Characteristic Item
Screen Screen size diagonal
Resolution
Pixel pitch
Pixel arrangement
Active area
Grayscale supported
Refresh rate
Contrast ratio
Brightness
Pixel rise/fall time
Viewing angle
Interface Digital Video In
Display control - brightness
Display identification
USB hub
Display status
Input formats Landscape orientation
Portrait orientation
Screen type
Physical Display size (without stand)
Display weight, typical
Mounting options
Power Adapter
Specification
541 mm (21.3 in.)
2048 x 2560 pixels (portrait)
2560 x 2048 pixels (landscape)
0.165 x 0.165 mm
LCR vertical stripe
422.40 (H) x 337.92 (V) mm
256 shades of gray, programmable gamma from
palette of up to 3061shades of gray
50 Hz
600:1 (typical)
2
750 cd/m (typical), 600 cd/m
50 ms typical (25 ms Tr/25 ms Tf)
170° (± 85°) horizontal/vertical
DVI Rev. 1.0 single-channel digital connector
DDC2B+
EDID read using DDC2B+
Universal Serial Bus (USB) Rev. 1.1:
1 uplink B port; 2 downlink A ports
Dual-stack tricolor LEDs on back panel
2560 x 2048 (8-bit per pixel)
2048 x 2560 (8- bit per pixel)
AMLCD (active-matrix liquid crystal display)
387 mm x 470 mm x 103 mm
(15.2 in. x 18.5 in. x 4.1 in.)
6.6 kg (14.5 lb) without stand
10.2 kg (22.5 lb) with stand
Desktop stand (standard);
100-mm VESA mounting (optional)
Ault MW122KA1223F52 (CAUTION: Use only the
power adapter supplied with the display unit.)
Dome E5 Specification | 37
2
min.(when new)