Planar Dome C3i/EX User Manual page 43

Dome E3 Specification
In locations where 240V outlets are used, connect the Dome E3 display to only a center-
tapped, 240V, single-phase supply (only for Canada and the United States).
Category Characteristic Item
Screen Screen size diagonal
Resolution
Pixel pitch
Pixel arrangement
Active area (mm)
Color supported
Refresh rate
Contrast ratio
Brightness
Pixel rise/fall time
Viewing angle
Interface Digital Video In
Display control - brightness
Display identification
USB hub
Display status
Input formats Landscape orientation
Portrait orientation
Screen type
Physical Display size (without stand)
Display weight (without stand)
Mounting options
Power Adapter
Specification
528 mm (20.8 in.)
1536 x 2048 pixels (portrait)
2048 x 1536 pixels (landscape)
0.207 mm, 123 ppi
Subpixel vertical stripe
423.9 (H) x 318.0 (V)
256 shades of gray, programmable gamma from
palette of up to 3061 shades
60 Hz
700:1 (typical)
2
800 cd/m (typical)
35 ms
170° (± 85°) horizontal/vertical
DVI Rev. 1.0 single- or dual-channel digital connector
DDC2B+
EDID read using DDC2B+
Universal Serial Bus (USB) Rev. 1.1:
1 uplink B port; 2 downlink A ports
Dual-stack tricolor LEDs on back panel
2048 x 1536 (8- bit per pixel)
1536 x 2048 (8-bit per pixel)
AMLCD (active-matrix liquid crystal display)
475 mm x 368 mm x 96 mm
(18.7 in. x 14.5 in. x 4.0 in.)
6.35 kg (<15 lb)
Desktop stand with integrated USB (standard);
100-mm VESA mounting (optional)
Ault MW122KA1223F52 (CAUTION: Use only the
power adapter supplied with the display unit.)
Dome E3 Specification | 33