Planar Dome C3i/EX User Manual page 45

Dome E3c Specification
In locations where 240V outlets are used, connect the Dome E3c display to only a center-
tapped, 240V, single-phase supply (only for Canada and the United States).
Category Characteristic Item
Screen Screen size diagonal
Resolution
Pixel pitch
Pixel arrangement
Active area (mm)
Color supported
Refresh rate
Contrast ratio
Brightness
Pixel rise/fall time
Viewing angle
Interface Digital Video In
Display control - brightness
Display identification
USB hub
Display status
Input formats Landscape orientation
Portrait orientation
Screen type
Physical Display size (without stand)
Display weight (without stand)
Mounting options
Power Adapter
Specification
528 mm (20.8 in.)
1536 x 2048 pixels (portrait)
2048 x 1536 pixels (landscape)
0.207 x 0.207 mm
R,G,B vertical stripe
423.9 (H) x 318.0 (V)
Native 16 M colors (RGB 8-bit data)
30 Hz
400:1 (typical)
2
400 cd/m (typical)
50 ms (typical)
170° (± 85°) horizontal/vertical
DVI Rev. 1.0 single- or dual-channel digital connector
DDC2B+
EDID read using DDC2B+
Universal Serial Bus (USB) Rev. 1.1:
1 uplink B port; 2 downlink A ports
Dual-stack tricolor LEDs on back panel
2048 x 1536 (24-bits per pixel, 8-bits per color)
1536 x 2048 (24-bits per pixel, 8-bits per color)
AMLCD (active-matrix liquid crystal display)
475 mm x 368 mm x 96 mm
(18.7 in. x 14.5 in. x 4.0 in.)
9.07 kg (<20 lb) estimated
Desktop stand with integrated USB (standard);
100-mm VESA mounting (optional)
Ault MW122KA1223F52 (CAUTION: Use only the
power adapter supplied with the display unit.)
Dome E3c Specification | 35