Writing An Application Configuration To The Ied - ABB Relion 650 Series REL650 Commissioning Manual

Section 3
Starting up
3.6
30
IEC09000658 V1 EN
Figure 7: Select: Use the following IP address
6. Close all open windows and start PCM600.
Setting up the PC to access the IED via a network
This task depends on the used LAN/WAN network.
The PC and IED must belong to the same subnetwork for this set-up to
work.

Writing an application configuration to the IED

Ensure that the IED includes the correct application configuration
according to project specifications.
The application configuration is created using PCM600 and then written to the IED.
Establish a connection between PCM600 and the IED when an application
configuration must be written to the IED.
IEC09000658-1-en.vsd
1MRK 506 331-UUS A
Commissioning Manual