Figure 23 Network > Wireless LAN 2.4G or 5G > MAC Filter
The following table describes the labels in this menu.
Table 17 Network > Wireless LAN 2.4G or 5G> MAC Filter
LABEL
MAC Address
Filter
Filter Action
MAC Filter Summary
Set
MAC Address
Apply
Cancel
7.7 Wireless LAN Advanced Screen
Use this screen to allow wireless advanced features, such as the output power, and RTS/CTS Threshold.
Chapter 7 Wireless LAN
DESCRIPTION
Select to turn on (Enable) or off (Disable) MAC address filtering.
Define the filter action for the list of MAC addresses in the MAC Filter Summary table.
Select Allow to permit access to the PLA, MAC addresses not listed will be denied access to the
PLA.
Select Deny to block access to the PLA, MAC addresses not listed will be allowed to access the
PLA.
This is the index number of the MAC address.
Enter the MAC address of the wireless station that are allowed or denied access to the PLA.
Click Apply to save your changes back to the PLA.
Click Cancel to reload the previous configuration for this screen.
PLA5236 User's Guide
41