11.1 Overview
This chapter provides information on the Maintenance screens.
11.2 What You Can Do
• Use the General screen
session.
• Use the Password screen
• Use the Time screen
• Use the Firmware Upgrade screen
• Use the Backup/Restore screen
defaults, backup configuration, and restoring configuration.
• Use the Restart screen
• Use the Language screen
Configurator.
• Use the WiFi Mode screen
11.3 General Screen
Use this screen to set the management session timeout period. Click Maintenance > General. The
following screen displays.
Figure 35 Maintenance > General
(Section 11.3 on page
(Section 11.4 on page
(Section 11.5 on page
56) to change your PLA's time and date.
(Section 11.6 on page
(Section 11.8 on page
(Section 11.8 on page
(Section 11.9 on page
(Section 11.10 on page
PLA5236 User's Guide
55
C
H A P T E R
Maintenance
55) to set the timeout period of the management
56) to change your PLA's system password.
58) to upload firmware to your PLA.
61) to view information related to factory
61) to reboot the PLA without turning the power off.
61) to change the language for the Web
61)to change the Wi-Fi mode on your PLA.
11