Pitney Bowes ADDRESSRIGHT DA300 Operator's Manual page 95

Appendix A • Control Panel Menus
5. Communications
(continued)
DA300 Printer Operator Guide
B. Parity
Parity determines the integrity of data that is sent. The
choices are (ODD), (EVEN) and (NONE).
C. Word Length
The choices are (7 DATA BITS) and (8 DATA BITS).
D. Line Termination
Typical software line termination is CR=CR;LF=LF. If your
software is not typical, the line termination can be
modified.
The menu choices are:
(CR=CR;LF=LF)
(CR=CR+LF;LF=LF)
(CR=CR;LF=CR+LF)
(CR=CR+LF;LF=CR+LF)
To set the Communications menu option:
1. Press the On Line button until the display reads OFF
LINE.
2. Press the Menu button for four seconds to display
the Setup Menu.
3. Press the + or – buttons to scroll through the Setup
Menu options until the 5. COMMUNICATIONS ap-
pears on the LCD panel.
4. Press the Enter button to select the options you
want. Continue to press menu, the + and - buttons
and enter to scroll to and select the options' next
levels.
5. Press the Menu button to back out of the menu until
the printer displays "OFF LINE".
6. Press the On Line button to enable the printer.
A-22