Pitney Bowes ADDRESSRIGHT DA300 Operator's Manual page 112

Material
Specifications
(continued)
Material Size and Thickness
Minimum
Maximum
Also see the table on the next page.
DA300 Printer Operator Guide
Material Notes
Envelopes have a flap along the long edge and are
processed by the printer non-flap edge first. Enve-
lopes may have either a diagonal or straight edge
along the envelope flap.
Booklets are defined as media having physical dimen-
sions 6 x 9" or larger. Booklets have an opening along
their long edge which is covered by a flap with an
adhesive seal.
Catalog envelopes have an opening along their short
edge which is closed by a flap with an adhesive seal.
Postcards have no folds or bends. The printable side
may have a higher surface roughness than the non-
printable side.
Self-mailers may be of "C," "Z," or 1/2-folded con-
struction. They may not exceed the maximum allow-
able thickness as specified on the previous page and
must be tabbed per postal regulations.
A catalog may consist of multiple pages bound by
adhesive or tabs on the feed edge or at 90 degrees
with respect to the feed edge.
Sheet stock may consist of 16 to 28 lb. bond as well
as 60 to 80 lb. coated stock. The size and thickness
constraints specified above apply.
Width
5" (127mm)
12.75" (324mm) 13.5" (343mm)
Appendix B • Specifications
Operating the Printer • 4
Height Thickness
3" (76mm) .003" (.0762mm)
.062" (1.57mm)
B-9