4 • Using the DA300 With Your Computer
Installing
the
Software
(continued)
4-6
8. Click OK at the "Successful Configuration" screen
that acknowledges the creation of a virtual printer (for
the accelerator).
9. An "Install" screen displays for creating a shortcut.
Click Yes if you want to create a shortcut to Envelope
Designer™ Plus on the desktop for the customer.
10. An "ADDRESSRight Printing System Setup" screen
displays. Click OK. The PC will reboot. Don't forget
to remove the CD after rebooting and place in a safe
place for future use if needed.
DA300 Printer Operator Guide