Vega VEGABAR 14 Operating Instructions Manual page 23

Nominal range
-1 ... 25 bar/-1 ... 2.5 MPa
-1 ... 40 bar/-1 ... 4 MPa
-1 ... 60 bar/-1 ... 6 MPa
Absolute pressure
0 ... 1 bar/0 ... 100 kPa
0 ... 1.6 bar/0 ... 160 kPa
0 ... 2.5 bar/0 ... 250 kPa
0 ... 4 bar/0 ... 400 kPa
0 ... 6 bar/0 ... 600 kPa
0 ... 10 bar/0 ... 1 MPa
0 ... 16 bar/0 ... 1.6 MPa
0 ... 25 bar/0 ... 2.5 MPa
0 ... 40 bar/0 ... 4 MPa
0 ... 60 bar/0 ... 6 MPa
Reference conditions and actuating variables (similar to DIN EN 60770-1)
Reference conditions according to DIN EN 61298-1
Temperature
-
Relative humidity
-
Air pressure
-
Determination of characteristics
Characterstic curve
Reference installation position
Influence of the installation position
Deviation determined according to the limit point method according to IEC 60770
Deviation
Influence of the ambient temperature
Average temperature coefficient of the zero
signal
5)
Long-term stability (similar to DIN 16086, DINV 19259-1 and IEC 60770-1)
Long-term drift of the zero signal
VEGABAR 14
Overload capacity, max.
pressure
130 bar/13 MPa
200 bar/20 MPa
200 bar/20 MPa
35 bar/3500 kPa
50 bar/5000 kPa
50 bar/5000 kPa
65 bar/6500 kPa
90 bar/9000 kPa
90 bar/9 MPa
130 bar/13 MPa
200 bar/20 MPa
200 bar/20 MPa
200 bar/20 MPa
+15 ... +25 °C (+59 ... +77 °F)
45 ... 75 %
860 ... 1060 mbar/86 ... 106 kPa (12.5 ... 15.4 psi)
Limit point adjustment according to IEC 61298-2
Linear
upright, diaphragm points downward
< 0.2 mbar/20 Pa (0.003 psig)
< 0.3 %
4)
< 0.15 %/10 K
< 0.1 %/2 years
6)
Relating to the nominal measuring range, incl. non-linearity, hysteresis and
3)
non-reproducibility.
Relating to the nominal measuring range.
4)
In the compensated temperature range of 0 ... +80 °C (+32 ... +176 °F),
5)
reference temperature 20 °C (68 °F).
Relating to the nominal measuring range.
6)
9 Supplement
Overload capacity, min.
pressure
-1 bar/-100 kPa
-1 bar/-100 kPa
-1 bar/-100 kPa
3)
23