Recommended Patch Panel; Connecting Serial Cables - Cisco ASR 902U Hardware Installation Manual

Hide thumbs Also See for ASR 902U:

Table of Contents

Installing the Cisco ASR 902 Router

To comply with the Telcordia GR-1089 NEBS standard for electromagnetic compatibility and safety,

Warning

connect the T1/E1 ports only to intra-building or unexposed wiring or cable. The intrabuilding cable must

be shielded and the shield must be grounded at both ends. The intra-building port(s) of the equipment or

subassembly must not be metallically connected to interfaces that connect to the OSP or its wiring. These

interfaces are designed for use as intra-building interfaces only (Type 2 or Type 4 ports as described in

GR-1089-CORE) and require isolation from the exposed OSP cabling. The addition of Primary Protectors

is not sufficient protection in order to connect these interfaces metallically to OSP wiring.

Recommended Patch Panel

We recommend using the following T1/E1 patch panels:

The following patch panels are introduced:

• CABLE-16T1E1—Cable for 16-Port T1/E1 Interface Module, 12 feet

• CABLE-32T1E1—Cable for 32-Port T1/E1 Interface Module

• PANEL-16-BNC—Breakout panel with 16 T1/E1 75-ohm BNC ports

• PANEL-32-RJ4—Breakout panel with 32 T1/E1 100/120- ohm RJ48 ports8

Also, the following patch panels are available from Optical Cable Corporation (http://www.occfiber.com).

• 48-port T1 RJ45 patch panel (part number DCC4884/25T1-S)

• 16-port E1 BNC patch panel (part number DCC16BNC/25T1-S)

To order a patch panel, contact the Sales and Marketing Support staff at Optical Cable Corporation:

•

The figure below shows the supported serial connectors, and the tables below detail the supported cables with

the Cisco ASR 902 Router.

Caution

The Cisco ASR 902 Router currently only supports the EIA/TIA-232 connector.

The Cisco ASR 902 Router currently supports only the EIA/TIA-232 connector.

Note

◦

800-622-7711 (toll-free in the U.S.A.)

◦ 540-265-0690 (outside the U.S.A.)

Cisco ASR 902 and ASR 902U Aggregation Services Router Hardware Installation Guide

Connecting Serial Cables

109

Table of Contents

Asr 902