Tenda W150M Review And Manual To Setup

Hide thumbs Also See for W150M:

Download this manual

Review and Guide to setup the New Tenda W150M WiFi 150MBPS Wifibridge

I've been testing the Tenda W150M AP/Router/Wirelessbridge for the last month or so to test its

stability and reliability as found the Vonets

Tenda W150M works as good as any 85MBPS Homeplugs! Its works absolutely superb and is a

doddle to setup!

The Tenda W150M can be purchased from World

Tenda W150M can be purchased from World-of-Satellite.co.uk http://www.world

satellite.co.uk/Networking-WiFi/Tenda

wifibridge-WIFI-W150M

Its can either be powered by supplied USB lead or supplied 3PIN PSU. This is great for Satellite

receivers such as the Blade BM7000S or the Technomate TM5402HD that only have one USB port,

even better news for receivers like the TM500 Super that dont have any USB ports. This really is the

WiFi Solution for ALL receivers! You

WiFi Solution for ALL receivers! You won't believe how good this WiFi Solution really is until you try

it. Once configured you can easily tuck behind your receiver/

To setup the Tenda W150M follow the guide below:

To setup the Tenda W150M follow the guide below: -

1. Power up the W150M using supplied USB lead or PSU.

Power up the W150M using supplied USB lead or PSU.

2. Press Mode button until Client+AP blue LED is alight.

Press Mode button until Client+AP blue LED is alight.

3. Connect to PC using supplied

Connect to PC using supplied Ethernet cable.

4. Go to Control Panel > Network Connections > Change Adapter Settings > Right Click over

rol Panel > Network Connections > Change Adapter Settings > Right Click over

Network connection > Select Properties. Click on TCP/IPv4 > Click Properties.

Network connection > Select Properties. Click on TCP/IP

as found the Vonets VAP11G can be hit and miss. Well I've got to say the

VAP11G can be hit and miss. Well I've got to say the

WiFi/Tenda-150Mbps-Portable-Wireless-Access-Point

ly tuck behind your receiver/set top box.

http://www.world-of-

Point-Router-Wireless-

WiFi Solution really is until you try

> Click Properties.

Page 1 Review and Guide to setup the New Tenda W150M WiFi 150MBPS Wifibridge I've been testing the Tenda W150M AP/Router/Wirelessbridge for the last month or so to test its I've been testing the Tenda W150M AP/Router/Wirelessbridge for the last month or so to test its...
Page 2 Open your browser, Internet Explorer or Fireforx etc... and go to web address IP 192.168.2.1 o to web address IP 192.168.2.1 to enter the W150M web interface web interface. Enter defaults Username = admin and password = admin . Enter defaults Username = admin and password = admin 8.
Page 3 10. Select you Wireless network and enter your security network key in the Pass Phrase box. Click “Next” to the following interface. 11. Wireless Basic Setting ( The rest of this guide has been taken from the supplied manual)
Page 4 Network Mode：Select one mode from the following. The default is 11b/g/n mode. 11b mode： Allow the wireless client to connect with the device in 11b mode at the maximum speed of 11Mbps. 11g mode： Allow the 11g/11n-compliant client device to connect with the AP at the maximum speed of 54Mbps.
Page 5 It is suggested that you choose WPA-personal for “Security Mode” and AES for “WPA Algorithms.” Input 8 ~ 63 numbers, letters, and symbols for pass phrase. Click “Next” to save the configuration. More details please refer to the following chapter. Click “Apply”...