Siemens S7-1500 Operating Instructions Manual page 60

Approvals
DE-76181 Karlsruhe
Germany
You will find the EC Declaration of Conformity on the Internet at the following address:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/15340/cert)
The current versions of the standards can be seen in the EC Declaration of Conformity and
in the certificates.
IECEx
The product meet the requirements of explosion protection according to IECEx.
IECEx classification: Ex nA IIC T4 Gc
The product meets the requirements of the following standards:
● EN 60079-0
Hazardous areas - Part 0: Equipment - General requirements
● EN 60079-15
Explosive atmospheres - Part 15: Equipment protection by type of protection 'n'
You can see the current versions of the standards in the IECEx certificate that you will find
on the Internet at the following address:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/15340/cert)
The conditions must be met for the safe deployment of the product according to the section
Notes on use in hazardous areas according to ATEX / IECEx (Page 26).
You should also note the information in the document "Use of subassemblies/modules in a
Zone 2 Hazardous Area" that you will find on the Internet at the following address:
Link: (https://support.industry.siemens.com/cs/ww/en/view/78381013)
ATEX
The product meets the requirements of the EC directive:2014/34/EC "Equipment and
Protective Devices for Use in Potentially Explosive Atmospheres".
Applied standards:
● EN 60079-0
Hazardous areas - Part 0: Equipment - General requirements
● EN 60079-15
Explosive atmospheres - Part 15: Equipment protection by type of protection 'n'
The current versions of the standards can be seen in the EC Declaration of Conformity, see
above.
ATEX approval: II 3 G Ex nA IIC T4 Gc
Test number: DEKRA 12 ATEX 0240X
The conditions must be met for the safe deployment of the product according to the section
Notes on use in hazardous areas according to ATEX / IECEx (Page 26).
60
Operating Instructions, 05/2017, C79000-G8976-C289-07
CP 1543-1