Siemens S7-1500 Operating Instructions Manual page 4

Preface
Abbreviations and names
● CP
In this document, the term "CP" is also used instead of the full product name.
● STEP 7
The name STEP 7 is used to mean the STEP 7 Professional configuration tool.
Conventions
Make sure you read the special notices below:
Note
A notice contains important information on the product described in the documentation,
handling the product or about parts of the documentation you should pay particular attention
to.
See also
Program blocks for OUC (Page 44)
Configuring the FTP server function (Page 49)
License conditions
Note
Open source software
The product contains open source software. Read the license conditions for open source
software carefully before using the product.
You will find license conditions in the following document on the supplied data medium:
● OSS_CP15431_86.pdf
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens' products and solutions only form one element of such a concept.
Customer is responsible to prevent unauthorized access to its plants, systems, machines
and networks. Systems, machines and components should only be connected to the
enterprise network or the internet if and to the extent necessary and with appropriate security
measures (e.g. use of firewalls and network segmentation) in place.
4
Operating Instructions, 05/2017, C79000-G8976-C289-07
CP 1543-1