Siemens S7-1500 Operating Instructions Manual page 54

Diagnostics and upkeep
5.2 Diagnostics with SNMP
You will find detailed information on SNMP and the Siemens Automation MIB in the manual
"Diagnostics and Configuration with SNMP" that you will find on the Internet:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/15392/man)
Performance range of the CP
The CP supports the following SNMP versions:
● SNMPv1
● SNMPv3 (with activated Security functions)
Traps are not supported by the CP.
Supported MIBs in SNMPv1
The CP supports the following MIBs:
● MIB II (acc. to RFC1213)
The CP supports the following groups of MIB objects:
– System
– Interfaces
– IP
– ICMP
– TCP
– UDP
– SNMP
● LLDP MIB
● Siemens Automation MIB
Note the rights for writing to the MIB objects, see the next section (SNMPv3).
54
Operating Instructions, 05/2017, C79000-G8976-C289-07
CP 1543-1