Serial Port 2
Serial Port 2 Configuration
This submenu allows the user the configure settings of Serial Port 2.
Serial Port 2
Select Enabled to enable the selected onboard serial port. The options are Enabled and
Disabled.
Device Settings
This item displays the status of a serial part specified by the user.
Serial Port 2 Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of a
serial port specified by the user. Select Auto to allow the BIOS to automatically assign the
base I/O and IRQ address.
The options for Serial Port 2 are Auto, (IO=2F8h; IRQ=3;), (IO=3F8h; IRQ=3, 4, 5, 6, 7, 9,
10, 11, 12;), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;), (IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10,
11, 12;), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;).
PCH-FW Configuration
The following firmware information will display:
•
ME FW Version
•
ME Firmware Mode
•
ME Firmware Type
•
ME Firmware SKU
ME FW Image Re-Flash
Use this feature to update the Mangement Engine firmware. The options are Enabled and
Disabled.
AMT Configuration
Intel AMT
Select Enabled to use Intel AMT (Active Management Technology) to enhance system
performance. The options are Enabled and Disabled.
85
Chapter 4: BIOS