Drive Belt; Changing The Drive Belt - HAKO Sweepmaster B800 R Instruction Manual

Maintenance and Service
5.8

Drive belt

The drive belt for side broom, cylindrical
broom and suction turbine must be
checked every 250 operating hours and
changed in the case of wear.

5.8.1 Changing the drive belt

1. Switch the vehicle off using the key
switch and secure with the parking
brake.
2. Open the seat console (Fig. 25/1)
and secure with the safety support
(Fig. 25/2).
3. Loosen the tension roller (Fig. 25/3)
and change the drive belt (Fig. 25/4)
for the cylindrical broom.
4. Tension the drive belt again using
the tension roller (Fig. 25/3).
To access the drive belt of the side
broom (Fig. 25/5), disassemble the cov-
er (Fig. 25/7).
To access the drive belt of the suction
turbine (Fig. 25/6), disassemble the
panel (Fig. 25/8) of the panel air filter.
3 4
Fig.25
1
2
8
6
5
7
61