Switching The Vehicle On - HAKO Sweepmaster B800 R Instruction Manual

Operation
3.4

Switching the vehicle on

For safety reasons, the driver's
seat is equipped with a seat
contact switch. The machine
can only be put into operation
when an operator is sitting on
the driver's seat. The function
of the seat contact switch must
not be bypassed.
1. Make sure that all control levers are
at their off or zero position.
2. The vehicle's parking brake must be
applied (Fig. 10/1).
3. Switch the vehicle on with the key
switch (Fig. 10/2).
Fig.10
2
1
31