Troubleshooting; Accessories - Samson Type 4708 Mounting And Operating Instructions

6

Troubleshooting

4
Leakage between supply pressure regu-
lator and adapter plate:
Check whether the diverting gasket
(Figs. 3 and 4) is installed and both fix-
ing screws are tightened properly.
4
Excessive blow-off over the venting bore
(3 in Fig. 2):
Check whether the diverting gasket
(Figs. 3 and 4) is installed correctly.
4
The air supply decreases and the output
pressure drops:
Check the filter cartridge (9 in Fig. 2) for
dirt and make sure the set point is cor-
rectly adjusted.
7

Accessories

Accessories
Mounting parts for mounting on rail acc. to EN 50022
Mounting parts for mounting on bracket for Type 3271Actuator
Intermediate plate for additional connection with Types 4708-10xx/-11xx/-53xx/-55xx/-58xx/-62xx/-63xx
Aluminum with G ¼ thread
Aluminum with 1/4 NPT thread
Stainless steel with G ¼ thread
Stainless steel with 1/4 NPT thread
Intermediate plate for additional connection with Type 4708-57.. Supply Pressure Regulator
Aluminum with G ¼ thread
Aluminum with 1/4 NPT thread
Stainless steel with G ¼ thread
Stainless steel with 1/4 NPT thread
Adjustment knob for set point adjustment
Nut for panel mounting
acc. to EN 50035
Troubleshooting
Order no.
1400-7341
1400-7342
1400-7343
1400-7400
1400-7404
1400-7402
1400-7406
1400-7401
1400-7405
1400-7403
1400-7407
1400-7408
1400-7725
19
EB 8546 EN