Adjustment Options For Max Seat; Changing The Armrest Position; Setting Height Of Armrests - Invacare TDX SP2 User Manual

1. On both sides, loosen the bottom backrest screw A.
Do not remove the screws!
2. Move the backrest to the required seat depth.
You can adjust the seat depth steplessly. Use scale B
on the seat as a guide for this purpose.
Ensure that the same seat depth is set on both sides.
3. Re-tighten the screws.

5.7 Adjustment options for Max seat

5.7.1 Changing the armrest position

Tools:
• 6 mm Allen key
1578997-E
1. Loosen the screws (1) and remove them.
2. Position the armrest as desired.
If you cannot move the armrest, hit the clamping jaw
slightly to loosen it.
3. Reposition the screws and tighten.

5.7.2 Setting height of armrests

• 3 mm Allen key
1. Loosen screw A.
2. Adjust armrest to desired height.
3. Re-tighten screw.
Setup
45