Option Mode - Set The Time And Date - Extech Instruments SL355 User Manual

11.7 Set the Time & Date in OPTION Mode
Operation Press
1. Time
Option
2. Enable
Time
Change

3. Change
or
the

entry
4. Save
the
Changes
Repeat this process to set the date. Note that the date format is dd-mm-yy.
Display Shows
24
Comments
Continued from Step 2 in
Section 11.6
Cursors are enabled and the
HOURS entry blinks to
indicate that it can be edited.
Use  and  to highlight an
entry.
Use  and  to change the
entry.
The new time setting is
stored.
SL355-en-GB_V1.8 8/17