Screen Shots For Recalling And Reviewing Dose Data - Extech Instruments SL355 User Manual

8.6.3 Screen Shots for Recalling and Reviewing Dose Data

Note that stored data is identified by date (day) and measurement start time (hh:mm) and that up to
20 RUNS can be stored simultaneously.
Operation Press
1. Switch
the meter
ON
2. Change MENU
the
Operating
Mode

3. Enable
Data
Recall

4. Review
repeatedly
Stored
RUNS

5. Review
Stored
RUN

6. Review
Stored
Data
Display Shows
14
Comments
The meter always powers
up in the Sound Level
Meter mode.
Selecting DATA mode.
Display the Start Date &
Time for the most recently
stored RUN
(dd-hh:mm).
Select RUN by Start Date
& Time.
Shows where data from
the selected run is stored
The stored data can be
reviewed as described in
steps 4 and 5 of section
8.6.2 above.
SL355-en-GB_V1.8 8/17