3.
Fill in parameters and save, go back to VPN page, you will find the new VPN file you just added;
4.
Tap on the VPN file to open the validation page as shown below;
5.
Fill in correct username and password to connect to VPN.
If the GVC3200 is connected to VPN successfully, icon
connection is failed, a prompt box will pop up to remind users whether to connect again. If
Firmware Version 1.0.0.X
Figure 14 GVC3200 Add VPN Files Screen
Figure 15 GVC3200 VPN Validation Screen
GVC3200 User Guide
will be shown in the top status bar; if the
Page 31 of 86