Transporting; Protection Against Frost (Emptying The Appliance) - Bosch SM series Instruction Manual

Transporting

Empty the dishwasher and secure loose
parts.
Drain the appliance according to the
following steps:
Turn on water supply.
1.
Switch on ON/OFF switch (.
2.
Select programme with the highest
3.
temperature.
The estimated programme duration
appears in the display window h.
Press START button P.
4.
Programme sequence starts.
After about 4 minutes, repeatedly
5.
press the START button P until
‹:‹‚ appears in the display window.
After about 1 minute the display
window will show ‹:‹‹.
Switch off ON/OFF switch (.
6.
Turn off water supply, disconnect
7.
supply hose and drain water.
Always transport the dishwasher
Note:
upright. This prevents residual water
from getting into the machine's controls
and causing the programme sequence
to malfunction.
Protection against frost
If the appliance is in a room where there
n g t h e a p p l i a n c e ) s t f r o s t ( E m p t y i P r o t e c t i o n a g a i n
is a risk of frost (e.g. holiday home),
empty the appliance completely (see
Transportation).
Installation and connection aus
43