aus Cleaning and maintenance
Rinse aid
Fill the rinse aid as soon as the refill
indicator` lights up in the control
panel.
Filters
The filters 1J keep large foreign
objects in the rinsing water away from
the pump. hese foreign objects may
occasionally block the filters.
The filter system consists of
a coarse filter
■
a flat fine filter
■
a microfilter
■
After each washing cycle check
1.
the filters for residue.
Unscrew filter cylinder as illustrated
2.
and take out filter system.
30
Remove any residue and clean
3.
filters under running water.
Re-install filter system in reverse
4.
sequence and ensure that the arrow
marks are opposite each other after
closing the filter system.
Spray arms
Limescale and contaminants in the
rinsing water may block nozzles and
bearings on the spray arms 12 and
1B.
Check outlet nozzles on the spray
1.
arms for blockages.
Unscrew the upper spray arm 12
2.
(1) and remove downwards (2).
Remove the lower spray arm 1B
3.
upwards.
Clean spray arms under running
4.
water.
Re-engage or screw on spray arms.
5.