Table of Contents
Advertisement
For Home Owners
Front panel, indoor module
How to use the front panel
All the most common settings are made from the panel as
well as control computer instructions such as comfort etc.
that you require the heat pump system to fulfil.
In order for the installation to be used optimally, certain basic
settings must have been made (see page 8) and that the
installation in general is carried out according to the instruc-
tions.
Menu 1.0 (the temperature in the water heater) is
normally shown on the display.
The plus and minus buttons and the enter button are
used to scroll through the menu system as well as to
change the set value in some menus.
Menu types
Control is divided into different menu types depending on
how "deep" into the controls you need to go.
Normal [N]:
The settings you as a customer often
need.
Extended [U]:
Shows all detailed menus except the
service menus.
Service [S]:
Shows all menus.
Changing of menu type is done from menu 8.1.1
Quick movement
To quickly return to the main menu from a sub menu,
press one of the following buttons:
Key lock
A key lock can be activated in the main menus by simultan-
eously pressing the plus and the minus buttons. The key
symbol will then be shown on the display.
The same procedure is used to deactivate the key lock.
6
NIBE™ SPLIT
Advertisement
Table of Contents
