RadioLink RC3S Instruction Manual page 15

"FWD-VTR" function.
2. Press "Dec(-)" or "Inc(+)" button to select RATE for forward side adjustment that
you want, when the "MODE" value is "INT" the VTR will not work, only the
"MODE" value set to "ACT" the VTR function is available. From the graph you will
clearly see the changes you have made on TG.P and RATE.
Adjustment method for EXP curve
Setup items
MODE: EXP turn on or turn off
RATE: EXP rate
Adjustment range
MODEL: INT/ACT
RATE: -100 ~ 0 ~ +100
1. Enter the function menu and use "Dec(-) " or "Inc(+)" button to access THEXP
function, then select the "FWD-EXP" function.
2. Press "Dec(-)" or "Inc(+)" button to select RATE for adjustment,set the most
comfortable value you want. From the graph you will clearly see the changes you
have made on the EXP RATE, also move the trigger to check the throttle status.
Adjustment method for BRK-EXP curve
Setup items
RATE: BRK-EXP rate
Adjustment range
RATE: -100 ~ 0 ~ +10 0
0~-100 flat braking
0 uniform braking
0~+100 sensitive braking
Brake side adjustment (select BRK)
(1).Press "Enter" key, the current BRK value will blink, use "Inc(+)" button to adjust
the + side when you want to quicker the rise and use "Dec(-)" button to adjust the-
14