Pakedge Device & Software WK-2 User Manual page 9

WK-2x User Manual
Power using the included power adapter
The WK‐2x can be configured in Client Bridge, WDS Access Point, or Access Point mode. When shipped from the
factory, the WK‐2x is set to Access Point mode. The default IP address of the WK‐2xisDHCP or192.168.1.250 and
username/password of pakedge/pakedgea
In order to log into the WK‐2x, you must first configure the TCP/IP settings of your PC/Notebook. Follow these
steps:
1. Under "Control Panel", double-click "Network Connections" and double-click the connection
of your Network Interface Card (NIC). The Local Area Connection Properties dialog
appears:
9