WK-2x User Manual
IP Address: Enter in the IP address the access point will be used on.
Subnet Mask: Select the class of the guest network. 255.255.255.0 is the standard setting and is selected
by default.
Manual IP Settings
Starting IP Address: This is the beginning of the DHCP range used on the guest network. If you have
multiple access points, you can give them the same DHCP range because the guest network of each access
point will be independent of one another.
Ending IP Address: This is the last IP address available on the DHCP range.
DNS Server IP: The DNS Server IP can be set to an external DNS or to the router's IP address if the router
provides a DNS server.
ADVANCED
On the Advanced page, you can configure:
21