Guest Network Settings - Pakedge Device & Software WK-2 User Manual

WK-2x User Manual
GUEST NETWORK SETTINGS
The Guest Network feature is designed for networks that do not have a guest VLAN. The Guest
Network acts as its own network and only has access to the internet. Each access point's guest
network is independent from the guest networks of other access points.
To enable the Guest Network, select On/Off. By default, the guest network name is Pakedge-
Guest and the IP scheme is set to 192.168.200.X. You have the option to change the default
settings, if desired. You can change the SSID, IP address, subnet, starting IP address and ending
IP address. Once changes are complete, click Apply to save them.
SSID

Radio: There is a guest network available on both the 2.4 GHz and 5 GHz band.

On/Off: This option turns the Guest Network on and off.

Wireless Name (SSID): The SSID of the Guest Network can be entered in this textbox.

Security Profile: Select a security profile that has already been defined under the Security Profiles tab.
Manual IP Settings
20