WK-2x User Manual
IP Settings
•
IP Network Setting: If yourWK-2x is connected to a DHCP server (such as a router), choose
"DHCP Client". Your WK-2x will be assigned an IP address from the DHCP pool (Not
recommended).
•
Specify an IP address (default): Select this option if you want to use a static IP address. Type
the appropriate entries in the text boxes for IP Address, IP Subnet Mask, Gateway, and Use
CustomDNSSevers.
VLAN Management
If you enable VLAN tagging in the WK‐2x Wireless section under any of the SSIDs, you can choose a VLAN
Management ID for the WK‐2x to access the administrative functions of your WK‐2x. Let's say you pick VLAN 3 to
be the VLAN used for management and the subnet range for VLAN 3 is 192.168.3.X. The IP address for the WX‐1x
must be 192.168.3.X, where X is any value in range.
•
VLAN Id for Management: To turn on VLAN Management, select the VLAN Id button.
•
In the VLAN Id text box, type the ID number of the VLAN you want to allow access to the
administrative functions of the WX-1x. For example, if VLAN3 is used for management, type in
3.
Click Accept to save your changes.
•
14