Tennant M30 Operator's Manual
  1. Manuals
  2. Brands
  3. Tennant Manuals
  4. Scrubber
  5. M30
  6. Operator's manual

Tennant M30 Operator's Manual

Scrubber-sweeper
Hide thumbs Also See for M30:
Table of Contents

Advertisement

Quick Links

See also: Service Information Manual , Service Manual
M30
(Gas/LPG)
(SN/ 008000−
)
Scrubber−Sweeper
English EN
Operator Manual
t
R
The Safe Scrubbing Alternative
R
ES
Extended Scrub System
R
TennantTrue
Parts
R
Hygenic
Fully Cleanable Tanks
R
FloorSmart
Integrated Cleaning System
R
IRIS
a Tennant Technology
Pro−Panelt Controls
Insta−Fitt Adapter
North America / International
9016100
For the latest Parts manuals and other
Rev. 01 (2-2017)
language Operator manuals, visit:
*9016100*
www.tennantco.com/manuals

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M30 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Tennant M30

Summary of Contents for Tennant M30

  • Page 1 Extended Scrub System TennantTrue Parts Hygenic Fully Cleanable Tanks FloorSmart Integrated Cleaning System IRIS a Tennant Technology Pro−Panelt Controls Insta−Fitt Adapter North America / International 9016100 For the latest Parts manuals and other Rev. 01 (2-2017) language Operator manuals, visit: *9016100* www.tennantco.com/manuals...
  • Page 2 Installation Date − INTENDED USE The M30 is an industrial rider machine designed to sweep/scrub hard surfaces (concrete, asphalt, stone, synthetic, etc). Typical applications include industrial warehouses, manufacturing facilities, distribution facilities, stadiums, arenas, convention centers, parking facilities, transportation terminals, and construction sites. Do not use this machine on soil, grass, artificial turf, or carpeted surfaces.

  • Page 3: Table Of Contents

    ....Directional Pedal ....Squeegee Protectors (Option) ..M30 Gas/LPG 9016100 (08−2016)
  • Page 4 ........Replacing Or Rotating The Side Squeegee Blades ....Replacing Or Adjusting The Side Brush Squeegee Blade (Option) . . . M30 Gas/LPG 9016100 (08−2016)

  • Page 5: Important Safety Instructions − Save These Instructions

    WARNING: Engine emits toxic gases. − With pads or accessories not supplied Serious injury or death can result. or approved by Tennant. The use of Provide adequate ventilation. other pads may impair safety. − In areas where flammable WARNING: Raised hopper may fall.
  • Page 6 − Do not modify the machine from its − Always be aware of surroundings original design. while operating machine. − Use Tennant supplied or approved − Do not access the video / help screens replacement parts. while the machine is moving.
  • Page 7 WARNING LABEL − Lift arm pinch parking brake before leaving machine. point. Stay clear of hopper lift arms Located next to the ignition switch on the Located on both hopper lift arms. instrument panel. (LPG machines only) M30 Gas/LPG 9016100 (08−2016)
  • Page 8 WARNING LABEL − Raised hopper may fall. surface. Do NOT touch Engage hopper support pin. Located on the side of the bumper, on Located on both hopper lift arms. the exhaust shield, and on the hydraulic reservoir. M30 Gas/LPG 9016100 (08−2016)

  • Page 9: Operation

    P. Solution tank drain hose G. Fuel tank Q. Hopper H. Seat shroud R. Rear squeegee I. FaST carton, or ES detergent tank, or S. Hopper safety pin ec−H2O System Module compartment T. Engine cover (option) J. Solution tank cover M30 Gas/LPG 9016100 (08−2016)

  • Page 10: Controls And Instruments

    D. Spray nozzle switch / High pressure washer switch (option) E. Operating / Hazard lights switch F. Steering column tilt knob G. Ignition switch H. Filter shaker switch I. Hopper door open / close switch J. Hopper raise / lower switch M30 Gas/LPG 9016100 (08−2016)

  • Page 11: Standard Touch Panel

    W. Solution flow decrease button (−) K. Brush pressure indicator lights X. Solution flow indicator lights L. 1−STEP button Y. Solution flow increase button (+) M. ec−H2O / ES (Extended Scrub / Z. USB port (Service only) FaST button (Option) M30 Gas/LPG 9016100 (08−2016)

  • Page 12: Pro−Panel Controls

    W. Zone control 4 button J. Sweeping vacuum fan button X. Solution on / off buttons K. Sweeping side brush button (Option) Y. USB ports (Service only) L. Rearview camera button M. Solution control access button M30 Gas/LPG 9016100 (08−2016)

  • Page 13: Symbol Definitions

    Unleaded fuel only Filter shaker Scrub mode Operating lights / Hazard light Sweeping side brush Headlights Sweeping vacuum fan Spray nozzle (Option) Sweeping main brush Scrubbing side brush Scrubbing vacuum fan / squeegee Scrubbing main brush Jack point M30 Gas/LPG 9016100 (08−2016)
  • Page 14 Zone setting 2 Zone setting 3 Zone setting 4 Hour meter Alert / Fault Checklist item unconfirmed Hour meter Checklist item confirmed Login Logout Select Supervisor settings Rotate machine view Supervisor menu Camera settings Start−up video M30 Gas/LPG 9016100 (08−2016)
  • Page 15 Home (main operating screen) Up arrow Down arrow Disable login Back arrow Add / Edit profiles Enable login Operator Calibrate touch Supervisor Checklist setup Edit profile Export all Add profile Export new Delete profile Export checklists Copy profile Enter M30 Gas/LPG 9016100 (08−2016)

  • Page 16: Operation Of Controls − Standard Panel

    LPG tank. The solution tank indicator displays the amount of liquid in the solution tank. Refill the solution tank when the indicator box is empty. The machine will stop scrubbing when the solution tank is empty. M30 Gas/LPG 9016100 (08−2016)

  • Page 17: Contrast Control Button

    The main sweep brushes also come on the engine speed icon and the thinner bars and when the sweeping side brush button is pushed. the icon is solid the engine is in the high setting. M30 Gas/LPG 9016100 (08−2016)

  • Page 18: Sweeping Vacuum Fan Button

    NOTE: The sweeping mode and the scrubbing mode cannot both function at the same time. The sweeping mode will cease operating and the scrubbing mode will begin operating if any scrub button is pressed while the machine is in the sweeping mode. M30 Gas/LPG 9016100 (08−2016)

  • Page 19: Scrubbing Main Brush Button

    10 second delay). Turn on the solution flow: Press the solution on / off button. The solution indicators will turn back on and the solution flow will default to the last setting used. M30 Gas/LPG 9016100 (08−2016)

  • Page 20: Machine Status Button

    For LPG machines: The Fuel indicator does NOT display the amount of fuel in the LPG tank. When the LPG tank is near empty, the fault indicator will flash and a low fuel message will appear. M30 Gas/LPG 9016100 (08−2016)

  • Page 21: Changing The Default Button

    The edges of all selected sweeping and scrubbing buttons will be illuminated to show that they are in the standby mode prior to the 1−STEP button being pressed. The selected buttons will become fully illuminated when the 1−STEP button is pressed. M30 Gas/LPG 9016100 (08−2016)

  • Page 22: Sweeping Main Brush Button

    The scrubbing mode and the sweeping mode cannot both function at the same time. The scrubbing mode will cease operating and the sweeping mode will begin operating if any sweep button is pressed while the machine is in the scrubbing mode. M30 Gas/LPG 9016100 (08−2016)

  • Page 23: Scrubbing Vacuum Fan / Squeegee Button

    The button will turn off. NOTE: The scrubbing side brush cannot operate independently from the main scrub brushes. The main scrub brushes also come on when the scrubbing side brush button is pushed. M30 Gas/LPG 9016100 (08−2016)

  • Page 24: Engine Speed Button

    The engine speed button is off when the engine is solution flow indicator bar / adjustment buttons in the low speed setting. and brush pressure indicator bar / adjustment buttons briefly appear in the display to show the settings for the selected zone. M30 Gas/LPG 9016100 (08−2016)

  • Page 25: Rearview Camera Button

    The rearview camera is located on the recovery tank, above where the vacuum hose is attached to the recovery tank. M30 Gas/LPG 9016100 (08−2016)

  • Page 26: Help Button

    Press the back arrow button to return to the main help screen. Press the about button to access machine operating system information. Press the home button to return to the main operating screen. Press the Pre−Operation Checklist button to access the Pre−Operation Checklist. M30 Gas/LPG 9016100 (08−2016)
  • Page 27 Press the Pre−Operation Checklist button to access the Pre−Operation Checklist. Press the back arrow button to return to the previous screen. Press the forward arrow button to access machine information from the list. M30 Gas/LPG 9016100 (08−2016)

  • Page 28: Video Help Button

    Press the home button to return to the main operating screen. Press the back arrow button to return to the previous screen. Press the video list button to access a text list of all help videos. M30 Gas/LPG 9016100 (08−2016)

  • Page 29: Completing The Pro−Check Pre−Operation Checklist

    Press the video help button to view the video related to a particular checklist item. Press the enter button when ready to start using the machine after completing the checklist. M30 Gas/LPG 9016100 (08−2016)

  • Page 30: Operation Of Controls − All Machines

    HAZARD LIGHT (OPTION) Press the bottom of the Operating / hazard light switch to turn on the hazard light, headlights, and taillights. Return the light switch to the center position to turn off the lights. M30 Gas/LPG 9016100 (08−2016)

  • Page 31: Operator Seat

    Release the lever to lock the parking brake. The Parking brake pedal will return seat into place. to the unlocked position. SEAT BELTS FOR SAFETY: Before starting machine, adjust seat and fasten seat belt. M30 Gas/LPG 9016100 (08−2016)

  • Page 32: Directional Pedal

    SQUEEGEE PROTECTORS (OPTION) The rear and side squeegee protectors help protect the rear squeegee from being damaged. To engage the rear squeegee protector, pull the pin, lower the protector bar, and reinsert the pin. M30 Gas/LPG 9016100 (08−2016)

  • Page 33: How The Machine Works

    FaST scrubbing system mixes the FaST−PAK concentrate with a small amount of water, creating a large volume of expanded wet foam. The FaST system can be used with all double scrubbing and heavy duty scrubbing applications. M30 Gas/LPG 9016100 (08−2016)

  • Page 34: Brush Information

    NOTE: The amount and type of soilage play an important role in determining the type of brushes Drive as straight a path as possible. Avoid to use. Contact a Tennant representative for bumping into posts or scraping the sides of the specific recommendations.

  • Page 35: Pre−Operation Checklist

    - Check the condition of the hopper dust filter and seals. - Clean the hopper and the debris screen. - Check the squeegee hose for debris or blockage. - Check the squeegees for damage, wear, and deflection adjustment. M30 Gas/LPG 9016100 (08−2016)

  • Page 36: Changing The Lpg Tank

    9. Slowly open the tank service valve and check for leaks. If a leak is found, immediately close the service valve and inform the appropriate personnel. M30 Gas/LPG 9016100 (08−2016)

  • Page 37: Starting The Machine

    10 seconds at a time or after the engine has started. Allow the starter to cool 15−20 seconds between starting attempts or damage to the starter motor may occur. 4. Allow the engine and hydraulic system to warm up for three to five minutes. M30 Gas/LPG 9016100 (08−2016)

  • Page 38: Filling The Solution Tank

    Drain, rinse, and refill the solution tank with clear cool water before operating the FaST or ec−H2O system. Conventional cleaning detergents may cause a FaST or ec−H2O system failure. M30 Gas/LPG 9016100 (08−2016)

  • Page 39: Es (Extended Scrub) Mode With Auto−Fill

    Do not use ATTENTION: For ES Scrubbing, only use flammable materials in tank(s). recommended low−foaming cleaning detergents. Machine damage due to the use of improper detergent will void the manufacturer’s warranty. M30 Gas/LPG 9016100 (08−2016)

  • Page 40: Setting Scrub Modes

    LED (light−emitting diode) light directly an ec−H2O error. above the ec−H2O button indicates when the ec−H2O system needs to be flushed. See ec−H2O MODULE FLUSH PROCEDURE in the MAINTENANCE section Standard Panel M30 Gas/LPG 9016100 (08−2016)

  • Page 41: Setting Fast Mode

    Machines equipped with Pro−Panel controls: pushed to indicate it is active. The slash disappears from the ES button and the button is illuminated when the ES button is pushed to indicate it is active. Pro−Panel Pro−Panel M30 Gas/LPG 9016100 (08−2016)

  • Page 42: Setting Brush Pressure

    Use the brush pressure increase (+) button and setting. the brush pressure decrease (−) button to change the brush pressure. The brush pressure indicator bar displays the current brush pressure setting. M30 Gas/LPG 9016100 (08−2016)

  • Page 43: Setting Solution Flow

    SETTING SOLUTION FLOW − STANDARD PANEL With the 1−STEP button activated, press either solution increase (+) button or solution decrease (−) button to set the solution flow level. The solution flow indicator lights display the current solution flow setting. M30 Gas/LPG 9016100 (08−2016)

  • Page 44: Scrubbing − Standard Panel

    Do not pick up. FOR SAFETY: When using machine, go slow on inclines and slippery surfaces. NOTE: The squeegee automatically rises when the machine is driven backwards. This prevents damaging the squeegee. M30 Gas/LPG 9016100 (08−2016)

  • Page 45: Scrubbing − Pro−Panel

    5. Release the parking brake, then press the Directional pedal to begin scrubbing. WARNING: Flammable materials or reactive metals can cause an explosion or fire. Do not pick up. FOR SAFETY: When using machine, go slow on inclines and slippery surfaces. M30 Gas/LPG 9016100 (08−2016)

  • Page 46: Double Scrubbing

    NOTE: If needed, reduce solution flow when stop operating. Scrub the heavily soiled area. scrubbing the floor for a second time. NOTE: Double scrubbing is not recommended in areas where the cleaning solution will run under racks or damage products. Standard Panel M30 Gas/LPG 9016100 (08−2016)

  • Page 47: Water Pickup Mode (No Scrubbing)

    Machines equipped with Pro−Panel controls: Press the scrubbing vacuum fan / squeegee button. The button will illuminate, the squeegee will lower, and the vacuum fan will start operating. Pick up the water or non−flammable liquid spill. Pro−Panel M30 Gas/LPG 9016100 (08−2016)

  • Page 48: Sweeping − Standard Panel

    EMPTYING THE HOPPER and DRAINING reactive metals can cause an explosion AND CLEANING THE RECOVERY TANK or fire. Do not pick up. sections of this manual. FOR SAFETY: When using machine, go slow on inclines and slippery surfaces. M30 Gas/LPG 9016100 (08−2016)

  • Page 49: Sweeping − Pro−Panel

    See EMPTYING THE HOPPER and DRAINING WARNING: Flammable materials or AND CLEANING THE RECOVERY TANK reactive metals can cause an explosion sections of this manual. or fire. Do not pick up. M30 Gas/LPG 9016100 (08−2016)

  • Page 50: Emptying The Hopper

    2500 mm (98 in). 4. Slowly back the machine up to the debris container. FOR SAFETY: When using machine, use care when reversing machine. Move machine with care when hopper is raised. M30 Gas/LPG 9016100 (08−2016)

  • Page 51: Engaging Hopper Support Pin

    Hopper raise/lower switch 3. Set the parking brake. until the hopper is completely lowered. 4. Remove the hopper support pin from the storage tube. WARNING: Lift arm pinch point. Stay clear of hopper lift arms. M30 Gas/LPG 9016100 (08−2016)

  • Page 52: Removing The Hopper Dust Filter

    12. Reconnect the squeegee vacuum hose to the hopper. 13. Disengage the hopper support pin and lower the hopper. See the DISENGAGING HOPPER SUPPORT PIN section of this manual. M30 Gas/LPG 9016100 (08−2016)

  • Page 53: Cleaning The Hopper And Debris Screen

    REMOVING THE HOPPER DUST FILTER section of this manual. 5. Start the machine. 11. Disengage the hopper support pin and lower the hopper. See the DISENGAGING HOPPER SUPPORT PIN section of this manual. M30 Gas/LPG 9016100 (08−2016)

  • Page 54: Draining And Cleaning The Recovery Tank

    5. Remove the vacuum screen from the recovery tank and rinse the screen. 2. Place the recovery tank drain hose nozzle next to a floor drain. 6. Rinse the float sensor. 3. Open the recovery tank Variable Drain Valve. M30 Gas/LPG 9016100 (08−2016)

  • Page 55: Draining The Recovery Tank With The Drain Plug

    Use the drain plug to drain the recovery tank if the tank is draining slowly or if the drain hose is plugged. 1. Park the machine so the larger drain in the recovery tank is positioned over the disposal drain. Set the parking brake. M30 Gas/LPG 9016100 (08−2016)

  • Page 56: Draining And Cleaning The Solution Tank

    NOTE: If necessary, turn the handle clockwise for a tighter fit and counterclockwise for a looser fit. FOR SAFETY: Before leaving or servicing machine, stop on level surface, set parking brake, turn off machine, and remove key. 1. Open the solution tank cover(s). M30 Gas/LPG 9016100 (08−2016)
  • Page 57 6. Close the solution tank Variable Drain Valve. 4. Rinse the solution tank. Flush dirt and debris 7. Reinstall the solution tank drain hose onto the toward the solution tank drain. back of the recovery tank. 8. Close the solution tank cover(s). M30 Gas/LPG 9016100 (08−2016)

  • Page 58: Faults / Alerts

    Press left arrow button to scroll back through the faults / alerts. Press the home button to return to the main operating screen. Press the back button to return to the previous screen. M30 Gas/LPG 9016100 (2−2017)
  • Page 59 Pressure Pressure 0x07B5 Fault Engine Fault Engine Inadequate voltage supply Shut off machine. Alternator Low Alternator Low to engine Contact TENNANT service Voltage Voltage representative *NOTE: Contact a Tennant Service representative for all other fault codes. M30 Gas/LPG 9016100 (08−2016)

  • Page 60: Options

    5. Twist the off/on knob to turn on the wand. 6. When finished cleaning, place the spray nozzle and wand back into their storage locations. 7. Press the bottom of the Spray nozzle switch to turn off the water supply. M30 Gas/LPG 9016100 (08−2016)

  • Page 61: Vacuum Wand (Option)

    10. Disassemble the vacuum wand assembly and adequate ventilation. Consult with your return it to the storage bag. regulatory authorities for exposure limits. Keep engine properly tuned. 11. Reattach the vacuum hose to the hopper lift arm. M30 Gas/LPG 9016100 (NIL)

  • Page 62: High Pressure Washer (Option)

    3. Connect the hose to the high pressure washer 6. Start the machine. system. WARNING: Engine emits toxic gases. Severe respiratory damage or asphyxiation can result. Provide adequate ventilation. Consult with your regulatory authorities for exposure limits. Keep engine properly tuned. M30 Gas/LPG 9016100 (08−2016)
  • Page 63 14. Press the bottom of the Pressure washer switch to turn off the washer. 15. Turn off the machine. 16. Disassemble the hose and wand and return them to the proper storage locations. 17. Close the front shroud. M30 Gas/LPG 9016100 (NIL)

  • Page 64: Machine Troubleshooting

    Hopper lip skirts worn or damaged Replace lip skirts Improper main brushes Call Tennant service representative Poor scrubbing Improper detergent or brushes Call Tennant service representative performance Solution tank empty Fill solution tank Debris caught on main brushes Remove debris M30 Gas/LPG 9016100 (08−2016)
  • Page 65 Shut off machine. Extinguish fire. If necessary, call emergency personnel. Recovery tank full Press the Scrub vacuum fan/squeegee button for one minute of extended water pickup. Empty recovery tank. ES models: activate the ES system to prevent this. M30 Gas/LPG 9016100 (08−2016)

  • Page 66: Maintenance

    MAINTENANCE MAINTENANCE M30 Gas/LPG 9016100 (08−2016)

  • Page 67: Maintenance Chart

    . . . Water and ethylene glycol anti-freeze, −34_ C (−30_ F) . . . Special lubricant, Lubriplate EMB grease (Tennant part number 01433−1) NOTE: More frequent maintenance intervals may be required in extremely dusty conditions. M30 Gas/LPG 9016100 (08−2016)
  • Page 68 . . . Water and ethylene glycol anti-freeze, −34_ C (−30_ F) . . . Special lubricant, Lubriplate EMB grease (Tennant part number 01433−1) NOTE: More frequent maintenance intervals may be required in extremely dusty conditions. M30 Gas/LPG 9016100 (08−2016)
  • Page 69 . . . Water and ethylene glycol anti-freeze, −34_ C (−30_ F) . . . Special lubricant, Lubriplate EMB grease (Tennant part number 01433−1) NOTE: More frequent maintenance intervals may be required in extremely dusty conditions. M30 Gas/LPG 9016100 (08−2016)

  • Page 70: Yellow Touch Points

    Fill the engine with oil until the oil is between the indicator marks on the dipstick. DO NOT fill past the top indicator mark. The engine oil capacity for Mitsubishi engines is 4.7 L (5 qt) with oil filter. M30 Gas/LPG 9016100 (08−2016)

  • Page 71: Rear Wheel Bearings

    Clean and lubricate the lift arm latch and latch and repack and adjust every 400 hours of stop after every 200 hours of operation. operation. Use Lubriplate EMB grease (Tennant part number 01433−1). TORQUE TUBES Lubricate the torque tubes after every 200 hours HOPPER LIFT ARM PIVOTS of operation.

  • Page 72: Hydraulics

    1057708 19 L (5 gal) If using a locally-available hydraulic fluid, be sure the specifications match Tennant hydraulic fluid specifications. Substitute fluids can cause premature failure of hydraulic components. ATTENTION! Hydraulic components depend on system hydraulic fluid for internal lubrication.

  • Page 73: Hydraulic Hoses

    Refer to the coolant manufacture for water/coolant mixing instructions. FOR SAFETY: When servicing machine, wear eye and ear protection when using pressurized air or water. M30 Gas/LPG 9016100 (08−2016)

  • Page 74: Air Filter

    FOR SAFETY: When servicing machine, keep flames and sparks away from fuel system FOR SAFETY: When servicing machine, keep service area. Keep area well ventilated. flames and sparks away from fuel system service area. Keep area well ventilated. M30 Gas/LPG 9016100 (08−2016)

  • Page 75: Engine Belt

    Inspect the PCV system after every 1000 hours of operation. FOR SAFETY: When servicing machine, avoid contact with battery acid. SPARK PLUGS Replace the spark plugs after every 1000 hours of operation. M30 Gas/LPG 9016100 (08−2016)

  • Page 76: Fuses And Relays

    12 VDC, 40 A Shaker 12 VDC, 40 A Reverse 12 VDC, 40 A Horn 12 VDC, 40 A Shutdown 12 VDC, 40 A Starter 12 VDC, 40 A Auxilliary 3 12 VDC, 40 A Spare M30 Gas/LPG 9016100 (08−2016)

  • Page 77: Engine Harness Fuses And Relays

    690 kPa (100 psi) of air pressure and press the reset button to manually reset the never hold the nozzle closer than 50 mm (2 in) to breaker. the filter. This may be done with the dust filter in the machine. M30 Gas/LPG 9016100 (08−2016)

  • Page 78: Thermo−Sentry

    Rotate the brushes from front to rear after every 50 hours of machine operation for maximum brush life and best scrubbing performance. NOTE: Replace brushes in sets of two. Otherwise one scrub brush may scrub more aggressively than the other. M30 Gas/LPG 9016100 (08−2016)

  • Page 79: Checking The Main Brush Pattern

    After 8. Reinstall the brush idler plates. 9. Close the inner and outer brush doors. 10. Check the brush pattern and adjust if needed after rotating them. Refer to CHECKING AND ADJUSTING THE MAIN BRUSH PATTERN. M30 Gas/LPG 9016100 (08−2016)

  • Page 80: Adjusting The Main Brush Taper

    1. Loosen the four mounting bolts on the brush drive housing. 2. Move the brush drive housing up to decrease the pattern width on that side of the scrub head or down to increase the pattern width on that side of the scrub head. M30 Gas/LPG 9016100 (08−2016)

  • Page 81: Side Brush (Option)

    3. Squeeze the spring handles and let the side brush drop to the floor. M30 Gas/LPG 9016100 (08−2016)

  • Page 82: Fast System

    5. Slide the FaST−PAK carton into the FaST−PAK bracket. 6. Connect the FaST supply hose to the FaST−PAK hose connector. 7. Scrub with the FaST system for a few minutes to allow the detergent to reach maximum foaming. M30 Gas/LPG 9016100 (08−2016)

  • Page 83: Replacing The Fast System Filters

    FOR SAFETY: Before leaving or servicing machine, stop on level surface, set parking brake, turn off machine. 1. Remove both flush hoses from the storage bag located behind the operator seat. 2. Lock the operator seat cover open. M30 Gas/LPG 9016100 (08−2016)

  • Page 84: Cleaning The Ec−H2O Filter Screen

    10. Reconnect ec−H2O intake and outlet hoses. If the ec−H2O system indicator light continues to flash, repeat the flush procedure. If the problem persists, contact an Authorized Service Center. 11. Close the operator seat cover. M30 Gas/LPG 9016100 (08−2016)

  • Page 85: Squeegee Blades

    5. Remove the rear squeegee assembly from the machine. 6. Loosen the rear retaining band tension latch 9. Reinstall the rear retaining band aligning the and open the retaining band. tabs with the holes. M30 Gas/LPG 9016100 (08−2016)

  • Page 86: Replacing Or Rotating The Side Squeegee Blades

    Be sure the holes in the squeegee blade are hooked 2. Open the outer brush doors. onto the tabs. 3. Unhook the latch on the side squeegee retaining band from the side squeegee assembly. M30 Gas/LPG 9016100 (08−2016)
  • Page 87 Discard the squeegee blade if both edges are worn. 9. Close the outer brush door. 6. Install the new or rotated squeegee blades. M30 Gas/LPG 9016100 (08−2016)

  • Page 88: Replacing Or Adjusting The Side Brush Squeegee Blade (Option)

    3. Open the retaining band tension latch. 6. Reinstall the retaining band tension latch. 7. Reinstall the squeegee bumper and reinsert the pins. M30 Gas/LPG 9016100 (08−2016)

  • Page 89: Leveling The Rear Squeegee

    5. Readjust the squeegee blade deflection if DEFLECTION necessary. Deflection is the amount of curl the overall squeegee blade has when the machine moves forward. The best deflection is when the squeegee wipes the floor dry with a minimal amount of deflection. M30 Gas/LPG 9016100 (08−2016)

  • Page 90: Skirts And Seals

    The skirts should be between 0 to 6 mm (0 to 0.25 in) from the floor when the scrub head is down. RECOVERY TANK SEAL Check the recovery tank cover seal for damage and wear daily. M30 Gas/LPG 9016100 (08−2016)

  • Page 91: Brakes And Tires

    Torque the shaft nut to 508 Nm (375 ft lb) lubricated, 644 Nm (475 ft lb) dry, after every 800 hours of operation. TIRES Check tires for damage and wear after every 100 hours of operation. M30 Gas/LPG 9016100 (08−2016)

  • Page 92: Pushing, Towing, And Transporting The Machine

    AND is 380 mm (15 in) or less from the ground. 4. To winch the machine onto the truck or trailer, attach the winching chains to the holes in the rear jacking brackets behind the rear tires. M30 Gas/LPG 9016100 (08−2016)
  • Page 93 FOR SAFETY: When unloading machine off truck or trailer, use winch. Do not drive the machine off the truck or trailer unless the loading surface is horizontal AND 380 mm (15 in) or less from the ground. M30 Gas/LPG 9016100 (08−2016)

  • Page 94: Machine Jacking

    FOR SAFETY: When servicing machine, block machine tires before jacking machine up. Use a hoist or jack that will support the weight of the machine. Jack machine up at designated locations only. Support machine with jack stands. M30 Gas/LPG 9016100 (08−2016)

  • Page 95: Freeze Protection (Machines Without Ec−H2O System)

    11. The remaining RV antifreeze does not need to be drained from the solution tank. NOTE: Storing or transporting machines equipped with the ES or the FaST system in freezing temperatures requires special procedures. Consult a TENNANT representative for more information. M30 Gas/LPG 9016100 (08−2016)
  • Page 96 12. Return the intake flush hose to the storage bag behind the operator seat. M30 Gas/LPG 9016100 (08−2016)

  • Page 97: Priming The Ec−H2O System

    8. Disconnect the outlet flush hose from the ec−H2O system outlet hose and return the flush hose to the storage bag. 9. Reconnect the ec−H2O system outlet hose to the hose to the scrub head. M30 Gas/LPG 9016100 (08−2016)

  • Page 98: Specifications

    Maximum ramp incline for loading − Empty tanks Maximum ramp incline for scrubbing Maximum ramp incline for transporting (GVWR) Maximum ambient temperature for machine operation 43_ C (110_ F) Minimum temperature for operating machine scrubbing functions 0_ C (32_ F) M30 Gas/LPG 9016100 (08−2016)

  • Page 99: Hydraulic System

    150 mm x 460 mm (6 in x 18 in) Rear (2) Solid 127 mm x 460 mm (5 in x 18 in) STEERING Type Power source Front wheel, hydraulic cylinder and rotary valve controlled Hydraulic accessory pump M30 Gas/LPG 9016100 (2−2017)

  • Page 100: Fast System

    SYSTEM Item Measure Solution pump 12 Volt DC, 11A, 0.7 GPM & 1.4 GPM flow, (2 speeds), 75 psi high−pressure shutdown Solution flow rate 2.65 LPM (0.7 GPM) − Low 5.30 LPM (1.4 GPM) − High M30 Gas/LPG 9016100 (08−2016)

  • Page 101: Machine Dimensions

    1475 mm (58 in) 1500 mm (59 in) Width (with side brush) 1625 mm (64 in) 1475 mm (58 in) Wheel base 1422 mm Track (56 in) (at rear wheels) 1473 mm (58 in) 2745 mm (108 in) 1014751 M30 Gas/LPG 9016100 (08−2016)

  • Page 102: Supervisor Controls

    If the new assigned supervisor mode login number is forgotten, please contact Tennant service. Press the backspace button if necessary to delete and reenter a number.

  • Page 103: Entering The Supervisor Mode

    Press the backspace button if necessary to delete and reenter a number. 3. The supervisor machine operation screen should appear in the display. Press the settings button to access the supervisor settings screen. M30 Gas/LPG 9016100 (08−2016)

  • Page 104: Supervisor Setting Screen / Screen Icons

    Press the down arrow button to navigate down through the menu items. Press the home button to navigate back to the main operating screen. Press the back button to navigate back to the previous screen. M30 Gas/LPG 9016100 (08−2016)

  • Page 105: Adding / Editing Profiles

    Press the Copy Profile button to copy an existing profile. Press the Delete Profile button to delete an existing profile. Press the home button to navigate back to the main operating screen. Press the back button to navigate back to the previous screen. M30 Gas/LPG 9016100 (08−2016)
  • Page 106 Press the flashing save button to save the new profile. The Enable Login button will change from Enable Login to Disable Login. See Press the help button to access the help DISABLING LOGIN for instructions how to screen. disable login. M30 Gas/LPG 9016100 (08−2016)

  • Page 107: Enabling The Login

    Delete Profile button to manage the current user profiles. 3. Press the yes button to enter the Default User screen. 4. Press either the Operator button or Supervisor button to select the desired default user. M30 Gas/LPG 9016100 (08−2016)

  • Page 108: Disabling The Login

    See ENTERING THE SUPERVISOR MODE 2. Press the Calibrate Touch button to recalibrate touch if the touch points become misaligned. 4. Press either the Operator button or Supervisor button to select the desired default user. M30 Gas/LPG 9016100 (08−2016)

  • Page 109: Exporting Checklists

    Press the home button to navigate back to the main operating screen. Press the back button to navigate back to the previous screen. 5. Remove the flash drive from USB port and turn off the machine. M30 Gas/LPG 9016100 (08−2016)

  • Page 110: Checklist Setup

    A check mark appears in the chosen interval. Press the home button to navigate back to the main operating screen. Press the back button to navigate back to the previous screen. Press the down arrow button to scroll down through Pre−Operation Checklist items. M30 Gas/LPG 9016100 (08−2016)

  • Page 111: Disabling / Enabling The Pre−Operation Checklist

    2. Press the Checklist Setup button to access the Pre−Operation checklist setup screen. Press the home button to navigate back to the main operating screen. Press the back button to navigate back to the previous screen. M30 Gas/LPG 9016100 (08−2016)

  • Page 112: Changing The Rear View Camera Settings

    Press the home button to navigate back to the main operating screen. Press the back button to navigate back to the previous screen. M30 Gas/LPG 9016100 (08−2016)
  • Page 113 Press the backspace button if necessary to delete and reenter a number. Press the space button to place space between letters / numbers.. Press the pound button to toggle between the number keypad and the letter keypad. M30 Gas/LPG 9016100 (08−2016)

  • Page 114: Setting / Changing The Date And Time

    1. Turn on the machine, login to the main operation screen, and press the setting button to access the supervisor settings screen. See ENTERING THE SUPERVISOR MODE 2. Press the Date/Time Set button to access the date / time screen. M30 Gas/LPG 9016100 (08−2016)

  • Page 115: Index

    Scrub vacuum fan/squeegee button, 44 Buttons, Controls and Instruments, 9, 10 Draining the Recovery Tank with the Drain Plug, Bypass valve, 90 Dust Filter, 50 Removing the Hopper Dust Filter, 50 Replacing the Hopper Dust Filter, 50 M30 Gas/LPG 9016100 (08−2016)
  • Page 116 Hydraulic Hoses, 71 Fault / Alert indicators - Standard panel, 56 Hydraulic System, System specifications, 97 Fault Indicators, 56 Faults / Alerts, 56 Filling the Solution Tank, 36 Conventional Scrubbing Mode, 36 ec−H20 scrubbing (ec−H20 Mode), 36 M30 Gas/LPG 9016100 (08−2016)
  • Page 117 FaST button, 39 Adjusting the Width, 78 Fault / Alert indicators, 56 Checking the Main Brush Pattern, 77 Scrubbing main brush button, 17 Replacing or Rotating the Main Brushes, 76 Main Brushes, Adjusting the Taper, 78 M30 Gas/LPG 9016100 (08−2016)
  • Page 118 Programming the Zone Control Buttons, 110 Scrubbing - Standard panel, 42 Propelling Motor, 89 Torque Shaft Nut, 89 Scrubbing main brush button - Pro-Panel, 20 Scrubbing main brush button - Standard panel, Scrubbing side brush button - Pro-Panel, 21 M30 Gas/LPG 9016100 (08−2016)
  • Page 119 Solution flow button - Standard panel, 41 Solution on / off button - Standard panel, 17 Solution on / off buttons - Pro-Panel, 21 Solution tank indicator - Standard panel, 14 Solution Tank Seals, 88 Spark Plugs, 73 M30 Gas/LPG 9016100 (08−2016)
  • Page 120 Turning Off the Machine, 35 Vacuum Wand (Option), 59 Vaporizer, 72 Video help button - Pro-Panel, 26 Warning Indicators, 56 Fault Indicators, 56 Water Pickup Mode (No Scrubbing), 45 Wheels, 89 While Operating the Machine, 32 M30 Gas/LPG 9016100 (08−2016)

Table of Contents

Save PDF