MODE Settings 1
(1) Hold down the Function Button
"Beep (2 seconds) beep beep"
(2) Forward rotation (2WS – HIGH) torque up settings
Use ▲ / ▼ to change the settings (U0 to U4 and
d0 to d4)
Always check the changes with ENT. If changes
to other settings are not required, hold down the
Function Button to complete the setting process.
(3) Reverse rotation (2WS – HIGH) torque up settings
Use ▲ / ▼ to change the settings (U0 to U4 and
d0 to d4)
Always check the changes with ENT. If changes
to other settings are not required, hold down the
Function Button to complete the setting process.
(4) Forward / reverse rotation (2WS – HIGH) speed
settings
Use ▲ / ▼ to change the settings (20 to 30)
Always check the changes with ENT. If changes
to other settings are not required, hold down the
Function Button to complete the setting process.
(5) Forward / reverse rotation (2WS – HIGH) overtime
settings
Use ▲ / ▼ to change the settings (t0 to t9)
Always check the changes with ENT. If changes
to other settings are not required, hold down the
Function Button to complete the setting process.
- 14 -
※