Finishlynx Installation And Setup; Finishlynx Installation; Finishlynx Setup - Fairplay MP-70 User Manual

F L
INISH YNX INSTALLATION AND SETUP
If you have selected the FinishLynx option, as explained in
67, your running time and results displayed on the scoreboard are sent to the
MP-70 control from the FinishLynx computer over a serial cable supplied by
Trans-Lux/Fair-Play.
F L I
INISH YNX NSTALLATION
The FinishLynx product is connected to the MP-70 control via a null modem
cable that attaches to the RS-232 port on the back of the MP-70.
Note: Please refer to the FinishLynx manual
at www.finishlynx.com for other
questions concerning connections
and hardware.
F L S
INISH YNX ETUP
Note: The following procedure is not a
complete explanation of how to install
and operated FinishLynx software.
For more information, please consult
the FinishLynx manual at
www.finishlynx.com.
Open the FinishLynx software on your PC, and set up FinishLynx by using the
following procedure.
1. The Options box appears, as shown at right. Choose the Scoreboards tab,
located at the top of the Options box.
2. Choose the following options settings:

In the Script box, choose Dak.lss.

In the Name box, choose the name of your scoreboard configuration.

In the Code Set box, choose Single Byte.

In the Serial Port box, choose COM1.

In the Baud box, choose 9600.

In the Pause Time box, choose the number of seconds that you wish to
leave the split time on the scoreboard before it returns to displaying the
running time.

Check the Always send place checkbox.

Check the Paging checkbox.

In the Size box, choose 8.

In the Time box, choose the pause time between the contestants.

In the Time Precision box, choose Hundredths.
3. Click OK .
4. Restart FinishLynx to finalize the configuration.
MP-70/50 • MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13
Track
F L on page
INISH YNX
69