Mixing Wireless And Conventional Cable Hookups - Fairplay MP-70 User Manual

MP-70/50 Wireless Option
M
IXING WIRELESS AND CONVENTIONAL CABLE HOOKUPS
To use conventional control wire with a scoreboard,
first disconnect the wireless receiver from the lamp
driver card. Conversely, before using a wireless
link, disconnect the conventional control wire from
the lamp driver card.
On indoor scoreboards, lamp driver and radio
receiver cards are both located behind the
scoreboard HOME SCORE window or shot timer
SECONDS window.
On outdoor scoreboards, the lamp driver and radio
receiver cards are located behind a service access
door adjacent to the disk
antenna.
Attempting to
simultaneously connect
conventional control wire
and a wireless receiver
card to a lamp driver card
can damage both cards.
The three illustrations
below display correct vs.
incorrect
wireless/conventional cable arrangements.
MP-70/50 • MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13
93