MP-73/53 G3 Wireless Option
C
G3
ONTROL
V
G3
IEWING YOUR
Turn on the MP-73/53 control. The following information will display briefly:
Brd ## – the scoreboard type.
Group ### – the group number.
MP-70 or MP-50 – the model number of the
controller.
VER.#.## - the firmware version of the
controller.
S
ET SCOREBOARD TYPE
Setting the MP-73/53 scoreboard type will automatically set the default group
number. For instructions on how set the scoreboard type, refer to the section
P
S
ROGRAMMING THE
S
ET GROUP NUMBER
1. Turn on the MP-73/53.
2. Press SHIFT + BAT/RF buttons and hold down for at least 6
seconds and release when it displays ENTER PASS CODE.
3. Type the following
sequence 9
4. When it displays CONTROL GROUP #, type in
desired group number then press ENTER .
Note: Additional information on the group number for
your scoreboard model is found in section
B
OARDS SUPPORTED
5. Turn off power to the MP-73/53, wait a moment and turn on power to the
MP-73/53.
126
SETTINGS
TRANSMITTER SETTINGS
(G3)
S
on page 142.
YSTEM
ETTINGS
(G3)
6
3
2
ENTER .
on page 147.
MP-70/50 • MP-72/52 • MP-73/53 • PN 98-0002-29 • REV 1709.13
Brd 01 Group 009
MP-70, VER.3.01
ENTER PASS CODE:
____________9632
CONTROL GROUP #
________________